Smooth Running Freight Elevator (GRF10B)

• Type: Goods Elevator
• Load Capacity: 1000kg
• Speed: 0.5m/S
• Drive Mode: AC
• Open & Close Type: Automatic
• Lift Mechanism: Telescoping Lift
• Model NO.: GRF10B
• Deceleration Device: Without Deceleration Device
• Guide Rail: T Guide
• Elevator Door: Center Opening Door
• Door Knife: Single
• Attendant: Without Attendant
• Condition: Brand New
• Rated Capacity: 1000kgs, 2000kgs, 3000kgs
• Car Door: Telescopic Opening
• Car Ceiling: Painted Steel
• Car Wall: Painted Steel
• C. O. P: Hairline Stainless Steel
• Car Floor: Chequer Steel
• Sill: Alloyed Hard Aluminum Reinforced Iron
• Transport Package: Wooden Case
• Specification: CE
• Trademark: SRH
• Origin: China
• HS Code: 8428101090
• Production Capacity: 30000sets/Year

Product Description

Freight elevator
1. Intelligent network system;
2. Photocell door protection device;
3. Accurate leveling;
4. Sturdy and durable;


We are a specialized supplier and exporter with its own factory covering the area of 147, 600 square meters with the annual capacity of 40, 000 sets elevators, escalators, three dimensional parking system. The products strictly meet the European standards of EN115, EN81, and get ISO9001, ISO14001 international authentication and CE certificates. And also with competitive price.

 

Standard Function
Travel Function	Collective selective controll	Collective selective controlling without the presence of operator
	Reopen with hall call	In the door shutting process,press reopen with hall call button can restart the door
	Car stops and door open	The lift decelerates and levels,the door only opens after the lift comes to a complete stop
	Automactic returning to the base station	When the traffic flow is low, elevator without receiving commanding signals will automatically return to the base floor and standby with the door closed
	Directly running	Under the operator's control, after the direct running button is pressed, the elevator only runs directly according to the directives from inside the car and does not respond to any calls from outside.
	Automatic pass without stop	When the car is crowded with the passenger or the load is close to preset value,the car will automatically pass the calling landing in order to keep maimum travel efficiency
Safety function	Repeated door closing	If the lift can not close the door due to certain obstacle or interference, the lift will reopen or re-shut the door until sundries results in more safe and reliable lift travel
	Power on re-leveling	A power failure might cause the elevator to stop between two floors. However, upon recovery of the power, the car automatically moves to the nearest leveling floor.
	Overload holding stop	When the car is overload,the buzzer rings and stops the lift in the same floor
	Anti-stall timer protection	The lift stops operation due to slippery traction wire rope
	Start protection control	If the lift does not leave door zone within the designated time after it gets started,it will stop the operation
	Inspection operation	When the lift enters into inspection operation,the car travels at inching running
	Up/down over-run and final limit protection	The device can effectively prevent from the lift's surging to the top or knocking the bottom when it is out of control.It results in more safe and reliable lift travel
	Down over-speed protection device	When the lift downs 1.2 times higher than the rated speed, this device will automatically cut off control mains,stop the motor running so as to stop lift down at over-speed. If the lift continues to down at over-speed, and the speed is 1.4 times higher than rated speed, safety tongs act to force the lift stop in order to ensure the safety
	Upward over-speed protection device	When the lift up speed is 1.2 times higher than rated speed, the device will automatically decelerate or brake the lift
	Photocell protection	In the door open and close period, infrared light that covers the whole door height is used to probe the door protection device of both the passengers and objects.
Emergency function	Emergency car lighting	Emergency car lighting automatically activated once power failure
	Five way intercom	Communication amid car,car top,lift machine room,well pit and rescue duty room through walkie-talkie
	Fire emergency return	If you start key switch in main landing or monitor screen,all the callings will be cancelled.The lift directly and immediately drives to the designated rescue landing and automatically opens the door
Man-machine interface	Micro-touch button for car call and hall call	Novel micro-touch button is used for operation panel command button in the car and landing calling button
	Floor and direction indicatior inside car	The car shows the lift floor location and current travel direction
	Floor and direction indicator in hall	The landing shows the lift floor location and current travel direction
Energy-saving function	Car ventilation, light automatic shut off	If there is no calling or command signal within the stipulated time, the car fan and lighting will be automatically closed in order to save the energy
	Remote shut-off	The lift can be called to main landing(after finishing the service) through the key switch and automatically exists the service
Optional Function
Travel Function	Operation control at stations	Through turning the key switch insatalled on a specific floor( optional), the elevator can e arranged to stop service for a certain floors.
	Door open time extending	Press special button in the car, the lift door keeps open for certain period of time
	Bell	In emergency conditions,if bell button above car operation panel is continuously pressed,electric bell rings on top of the car